Paire d'embases POUR TRES NOMBREUSES SAVAGE - - VOIR DETAILS - - marque WEAVER

Expédié sous 24 / 48h

                                     

                Marque Weaver : gage de qualité, conçu et fabriqué aux USA

 

LOT DE DEUX EMBASES

Longueur du rail 21 mm weaver : 30 mm

Entraxe entre les deux trous : 21.5 mm

Matière : aluminium de très haute qualité

Couleur : NOIR GLOSS OU NOIR MAT AU CHOIX

 

Peut servir d’embase ou arrière pour :

Navy Arms Country Boy Muzzleloader

Ruger American SA LA

SAVAGE A17 / A22 / A22MAG

Savage Axis Series, Edge

SAVAGE 212 ET 220 SHTG

SAVAGE 110 111 112 114 116 SERIES HOG HUNTER, LADY HUNTER LA (W/ ACCUTRIG.) (POST 2003), STEVENS 200, 10 ML II (6-48 vis)

SAVAGE 10 11 12 14 16 SA (W/ ACCUTRIG.) (POST 2003) (6-48 vis)

SAVAGE 10 ML II (post 2003)

THOMPSON CENTER VENTURE, COMPASS

Winchester 52 *avec même espacement des trous

Savage / Stevens 200

Peut servir uniquement d’embase avant pour :

Anschutz 1568

Beretta Mato Rifle

Beretta 500, 501, 502

Browning Bolt Action BBR LA ET SA, Hi-Power, other calibers, older models, BBR Bolt Action, long and short actions

Churchill 950, 950-C, 972-C

Colt 57

Cooey 71

Husqvarna 900, 9000

MAUSER BAUER 3000 & 4000 / RECEIVER RING ABOUT 1.410" DIAMETER (98FN) / RECEIVER RING ABOUT 1.300" DIAMETER (SWEDISH 96)

 Enfield with receiver cut down like a Winchester 70

H&R 300, 301, 330, 370 (pre-1973); 300, 301 long action in 270, 30-06, 7mm; 300 Win (1973+)

Herters J9

High-Standard High-Power

Interarms Viscount

Marlin 455, MR7, XL7, XS7, X7

Musgrave Mark I, II, III, IV

Parker Hale 1000, 1000C, 1100, 1200, 1700

SAVAGE 10, 11, 12, 14 & 16 (SHORT ACTIONS). STRIKER PSTL, 510, 512, 516, S/ A 10 ML (2-PIECE ONLY) PRE 2003 MODELS

SAVAGE 10, 111, 112, 114, 116 (LONG ACTIONS); 210 SHTG (USE X-HIGH RINGS) PRE 2003 MODELS

SAVAGE 10 ML

Sears 50, 51, 51L, 53

Smith & Wesson Mauser Actions with 1.3" diameter small receiver ring

Stevens 110E

SCHULTZ & LARSEN

Voere, 2165/1, 2165/2, 2165/3 & 2165/4 (Mauser action)

Winchester 54 & EARLY MOD. 70 W/SERIAL NO. BELOW #66 350

Winchester 70 LONG ACTION, (SOME 70 COYOTE SHORT ACTIONS MAY TAKE LA BASE ) (HOLE SPACING SAME) 670, 770

Winchester 70 LONG ACTION (HOLE SPACING DIFFERENT) & 70 SUPER EXPRESS

Winchester 70 SHORT ACTION (1984+)

Winchester 70 WSM

Winchester 70 WSSM

 

Weatherby FN Mauser-style actions

 

Winchester 52 (avec même espacement des trous), 54, early models, 70 with serial number below #66 350, 70 Long Action (avec même espacement des trous), 670, 770, 70 Long Action (different hole spacing), 70 Super Express, 70 Short Action (1984+), 70 WSM, 70 WSSM

Note: For Savage 10, 12, and 16 short actions; Striker; Pistol; 510; 512; 516 short action; 10 ML (2-piece only) pre-2003 models with shorter tube scopes or red dot scopes use #402 extension front base or one-piece base if available. Extension base allows an extra 0.689".

Note: For Savage / Stevens 200 with shorter tube scopes or red dot scopes use #402 extension front base or one-piece base if available. Extension base allows an extra 0.689".

Note: For 1.4" diameter Mauser Receiver Ring 98FN and 1.3" diameter Receiver Ring (Swedish 96) shimming is probably required for perfect scope alignment. The rear base may require modifications for correct fit to military actions.

Note: The Winchester 52 with the same hole spacing may require bolt and/or safety alterations to function safely and properly. Consult with a qualified gunsmith.

Note: The handiest way to pinpoint the correct base for the Winchester 52 & Winchester 70 Long Action rifles is to check the spacing of the tapped holes for the rear base and compare it to the hole spacing for the front base. If the hole spacing is the same, then for model 52 use 46+ 46 and for model 52 use 25+ 57. If the hole spacing is different, then for model 70 use 47+ 46 and for model 70 use 49A+ 46.

 Vis incluses et vérifiées avant envoi